Practical application of static mixing tube (3) In the previous article, we briefly explained the principle of static mixing tubes and the choice of the dispenser. So when we are ready, what else should we pay attention to? As we mentioned earlier, the quality of the adhesive depends on the degree o

Practical application of static mixing tube (2) There are two ways to dispense glue using a static mixing tube—manual dispenser and MMD. Manual dispensers are more cost-effective, so we recommend using manual dispensers. So what should you pay attention to when using a manual dispenser. We should f

Choosing a suitable static mixing tube is not just choosing one in the product catalog. In the absence of experience, you should refer to the information provided by the adhesive supplier. Or refer to the opinions of the static mixing tube supplier. Because when the glue is stirred in the static mix

As the leading static mixer manufacturer, SAYYES static mixing tube is specially designed for the new 50ml dispensing gun. Its intubation interface has better sealing performance than ordinary bayonet mixing tube, and the fluid distribution is more scientific. The front and back blades of the spiral

The good composite effect of two-component polyurethane adhesive is related to various conditions. In addition to the use of good quality static mixer nozzles and dual cartridge dispensing guns, changes in the working environment are also very important factors. In other words, as the seasons and cl

How does AB glue change from liquid to solid? SAYYES is a professional dual component packaging manufacturer in China, to introduce the three stages of AB glue curing.

This glue gun is not ordinaryI can see that there is an unusual gun here. This gun is called a adhesive dispensing gun. How do you use this gun?1. First read the life book, pay attention to the different components of the glue gun, and how they should work. The instruction manual should be able to t

What's wrong with AB glue half dry? In the process of AB glue sticking, is it often encountered that the AB glue is half-dry and does not solidify for a long time.There may be several reasons, check it yourself. 1. The ratio is wrong2. Uneven mixing3. Too much color concentrate or too much other fil