Views:4 Author:Site Editor Publish Time: 2021-09-27 Origin:Site
In the previous article, we briefly explained the principle of static mixing tubes and the choice of the dispenser. So when we are ready, what else should we pay attention to?
As we mentioned earlier, the quality of the adhesive depends on the degree of mixing. Therefore, it is essential to ensure that the AB glue is thoroughly mixed. There are too many uncertain factors in the manual mixing of AB glue. We strongly recommend using a static mixing tube for mixing. Nevertheless, many factors can cause insufficient mixing. Different chemical reagents have different responses to light, temperature, and humidity. We try our best to work in a suitable and stable environment.
If there is a pause in the dispensing process, the solidified material in the mixing tube will change the effective diameter of the mixing tube. Changes in the effective diameter will adversely affect the chemical and physical properties of the compound. Therefore, in the test, we must consider the impact of the hardening of the rubber in the mixing tube. Minimize the adverse effects of curing. Suppose in a particular application; the mixing tube needs to be replaced frequently due to the solidification of the rubber in the static mixing tube. In that case, the end-user needs to weigh the advantages and disadvantages of choosing a low-cost mixing tube and choosing a more expensive one, but it can avoid frequent replacement of the mixing tube.
These are the suggestions we can give you on how to use static mixing tubes. If you are interested in this, please get in touch with us for more industry information. You can leave your contact information, and we will reply to you in time.
ADD:Room 904, Guangren Zhiye Building, 106 Guantai Road, Nancheng District, Dongguan, Guangdong, China. 523000