Views: 7 Author: Site Editor Publish Time: 2022-03-31 Origin: Site
In the past, it was challenging for people to mix glue or other fluids, especially when there were a lot of fluids to be mixed. Many people think that industrial blending is as easy as brewing instant coffee in life, but this is a misconception.
The static mixer tube does not need to be driven by an external force. When the fluid passes through the mixer, it performs continuous cutting and overlapping to convert two or more materials into a uniform mixed liquid. The square static mixing tube is a high-end product with high efficiency, economy, and durability after improvement and innovation based on the circular static mixing tube. Its principle is that the upper, lower, left, and suitable blades are arranged in sequence. When leafing, it will cut it into 4 portions.
The circular static mixing tube can only cut the fluid into 2 parts, so it is twice the mixing uniformity of the circular static mixing tube so that the fluid is mixed more evenly because its blades are arranged in natural order, so The resistance of the square static mixing tube is also at least one third smaller than that of the circular static mixing tube, which reduces the drive of external force and achieves a good effect of reducing costs.
After using the square static mixing tube is stopped, the amount of liquid remaining in the square static mixing tube will be more than one-third less than that of the circular static mixing tube, which significantly reduces the cost of raw materials. Therefore, we can use the square static mixing tube in It can reduce the waste of raw materials, reduce the cost of external driving, and at the same time significantly improve the mixing effect of raw materials, thereby reducing the defective rate of products and improving production efficiency.
Phone: (+86)-133-3268-9021（Mark Li)
ADD:RM530, No 11, Dongguan Ave, Dongcheng District, Dongguan, Guangdong, China. 523000
Haijing Company Copyrights 2021 All rights reserved.