Home » News » Industry News

Industry News

  • What Should I Do If The Glue Gun Does Not Produce Glue?
    2020-12-08

    It is indeed a headache for the staff to encounter that the dual dispensing glue gun does not produce glue. Today we will discuss with you several reasons why the glue gun does not produce glue. I hope it will be helpful to everyone.Manual dispensing gun1) The manual dispensing gun is not cleaned, a

  • What Are The Applications Of The Plastic Static Mixer?
    2020-11-18

    The plastic static mixer is commonly known as mixing head, dispensing nozzle, mixing rod, spiral tube, spiral rod, and is mainly used to mix two-component liquid materials.

  • What Are The Application Industries Of AB Glue?
    2020-11-05

    SAYYES is a professional dual cartridge systems manufacturer , which is mainly used in the AB glue industry. So what are the applications of AB glue?

  • What Is A Plastic Static Mixer?
    2020-11-05

    SAYYES is a Custom Plastic Static Mixer Manufacturer & Supplier in China, specializing in the production of Plastic Static Mixers.

  • Introduction to the knowledge of dispensing syringe
    2020-10-15

    The dispensing syringe is a kind of commonly used consumable material in the electronic industry. It is used to hold glue. Micro pine is a brand of dispensing syringe, specializing in the supply of needles, dispensing syringe, dispensing machine, etc. There are two kinds of dispensing needles, Japan

  • How to choose and use glue needle correctly?
    2020-10-15

    If you order glue for the second time, you should learn to adjust slowly. The selection of glue needle is from small to large, the speed of glue dispensing is from fast to slow, and the pressure regulation is from small to large. Compared with glue with good flow, you can choose from small needles,

  • Points to note in the process of dispensing
    2020-10-15

    In the process of product gluing, the defects are as follows: unqualified glue point size, wire drawing, glue impregnation, poor curing strength and easy to fall off, etc. To solve these problems, it is necessary to study the technical parameters as a whole in order to find a solution.In the process

  • Foam Pump Classification and Use
    2020-06-18

    What is a foam pump?The foam pump is ejected under a rapid condition, and then a certain negative pressure is formed around the liquid column. The suction gas generated by the negative pressure enters the mixing part, so that air and liquid are mixed again to form bubbles, which are ejected from the

  • Total 4 pages  Go to Page
  • Go